With Zebra’s Printer Setup Utility, configuring your Link-OS printers to optimize performance is easy – no specialized knowledge required.
To use, tap the printer you wish to configure. Your printer and device will instantly begin communicating via Bluetooth. Then follow the simple setup wizards that walk you through how to set specific printing parameters – such as calibration, media type, ribbon, printer language and print quality – to optimize performance. If your Android device does not support Tap and Pair via NFC, the app can discover your printer via Bluetooth and network, or connect to it via USB.
With the Security Assessment Wizard feature, assess your Zebra printer security posture, compare your settings against security best practices and make changes based on your conditions to increase protection.
Bluetooth Printers are now manageable, even in the field!
Normally, Bluetooth printers are not easily managed – particularly when they are used in the field by a mobile workforce. Zebra’s Printer Setup Utility makes Bluetooth printers manageable via the Cloud by allowing the app to retrieve files from your CLoud storage provider and then transfer these files to the printers for configuration and printer OS updates. This simplifies the management of Link-OS Bluetooth printers, dramatically improving both printer ROI and the productivity of a mobile workforce.
Help is just a tap away - use the "Zebra Assist" feature to send your printer's configuration directly to Zebra's support team.
The following Zebra Link-OS printers series are supported: ZD400, ZD500, ZD600, ZQ300, ZQ500, ZQ600, ZT200, ZT400, ZT500, ZT600, iMZ and QLn, ZR338, ZR600.
The app supports Bluetooth Classic, network and USB On-The-Go connectivity.
Note: Tap/Pair and USB On-The-Go can only be used on those Android devices that support NFC (for Tap/Pair) and USB OTG.
Dengan Utiliti Penyediaan Pencetak Zebra, mengkonfigurasi pencetak Link OS anda untuk mengoptimumkan prestasi adalah mudah - tiada pengetahuan khusus diperlukan.
Untuk menggunakan, ketik pencetak yang ingin anda konfigurasikan. Pencetak dan peranti anda akan serta-merta mula berkomunikasi melalui Bluetooth. Kemudian ikuti penyihir persediaan yang mudah yang membimbing anda bagaimana untuk menetapkan parameter pencetakan tertentu - seperti penentukuran, jenis media, reben, bahasa pencetak dan kualiti cetak - untuk mengoptimumkan prestasi. Jika peranti Android anda tidak menyokong Sentuh dan Sepasang melalui NFC, aplikasinya boleh menemui pencetak anda melalui Bluetooth dan rangkaian, atau sambungkannya melalui USB.
Dengan ciri Wizard Penilaian Keselamatan, menilai postur keselamatan pencetak Zebra anda, bandingkan tetapan anda terhadap amalan terbaik keselamatan dan buat perubahan berdasarkan syarat anda untuk meningkatkan perlindungan.
Pencetak Bluetooth kini boleh diurus, walaupun dalam bidang!
Biasanya, pencetak Bluetooth tidak mudah diuruskan - terutamanya apabila ia digunakan dalam bidang oleh tenaga kerja mudah alih. Utiliti Persediaan Pencetak Zebra membuat pencetak Bluetooth boleh diurus melalui Awan dengan membenarkan apl mengambil semula fail dari penyedia simpanan CLoud anda dan kemudian memindahkan fail-fail ini ke pencetak untuk kemas kini dan pencetak OS update. Ini memudahkan pengurusan pencetak Bluetooth Link-OS, secara mendadak meningkatkan kedua-dua ROI pencetak dan produktiviti tenaga kerja mudah alih.
Bantuan hanya ketuk - gunakan ciri "Zebra Assist" untuk menghantar konfigurasi pencetak anda secara langsung kepada pasukan sokongan Zebra.
Siri pencetak Zebra Link-OS berikut disokong: ZD400, ZD500, ZD600, ZQ300, ZQ500, ZQ600, ZT200, ZT400, ZT500, ZT600, iMZ dan QLn, ZR338, ZR600.
Aplikasi ini menyokong sambungan Bluetooth Classic, rangkaian dan USB On-The-Go.
Nota: Ketik / Sepasang dan USB On-The-Go hanya boleh digunakan pada peranti Android yang menyokong NFC (untuk Ketuk / Sepengang) dan USB OTG.